|
|
Click on image to enlarge |
Crimp Insert Application:
- Designed for soldering or crimping on mineral insulated cable or crimping on insulated wire.
Construction:
- Brass Machined insert with .1mm tolerance on the cable.
Grommet Application:
- Fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector.
Construction:
- Neoprene ring slit for easy mounting over the wire. Will compress on the wire when cover is fitted.
Temperature Rating:
Part Number:
Wire Insert Application:
- Wire inserts will provide a good strain relief without protruding parts from the connector.
Construction:
- Thermoplastic material with round or oval hole to fit around a specific wire. Other dimensions available.
|
 |
Braze Crimp Adaptor
Application:
- Adapter can be fitted in the entrance hole of the connector to braze/crimp in mineral isolated cable.
Construction:
- Stainless steel adapter, AISI-303/DIN-1.4305
- The adaptor fits in all standard connectors.
|
 |
Connector Wire Clamp Bracket
Application
- Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diamter.
Construction:
- All stainless steel, incl. stainless steel screws.
Part Number:
- TP-530-18-A (1/8") Insert Crimp
- TP-530-36 (3/16") Insert/Hose
- TP-530-14 (1/4") Insert
- TP-530-16 (1/16") Insert
|
 |
Tube Adaptor Standard Connector
Application:
- Can be used to mount thte connector on mineral insulated cable or a tube type thermocouple. Can be used several times if not overtightened.
Construction
- Stainless steel compression fitting with a brass ferrule on stainless steel bracket.
Part Numbers
- TP-560-16 (1/16")
- TP-560-18 (1/8")
- TP-560-36 (3/16")
- TP-560-14 (1/4")
- TP-560-38 (3/8")
Call for additional sizes.
|
 |
U Bracket Crimp/Braze
Application
- Allows the use of two standard wconnectors to be fitted on duplex mineral cable or duplex wire.
Construction
- Stainless steel crimp braze/crimp-tube (AISI-303/DIN 1.4305
|
Click on image to enlarge |
Wire Clamp
1. Application:
- Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter.
Construction:
- All stainless steel incl. Stainless steel screws.
U Bracket
2. Application:
- Allows the use of two connectors to be fitted on duplex mineral cable or duplex wire
Construction:
- Chrome plated cabron steel bracket with plated steel screws.
- Is designed to be crimped on the transition piece with an outside diameter of 6 or 8 mm.
U Bracket
3. Application:
- Allows the use of two connectors to be fitted on a duplex wire. Construction provides optimum strainrelief and large difference in minimum and maximum diameter.
Construction:
- All stainless steel with stainless steel screws.
|
 |
U Bracket Tube Adaptor
Application:
- Allows the use of two connectors to be fitted on a duplex mineral insulated cable or a tube type thermocouple. Can be used several times if not overtightened.
Construction:
- Stainless steel compression fitting brazed on stainless steel L bracket
- Stainless steel nut and brass ferrule
|
 |
Protection Boot
Application
- The two flexible silicone rubber boots will cover the connector set snugly and prevent moisture, water, and dirt from entering the connector.
Temperature rating:
Construction:
- Silicone cover with retention ring prevent disconnection due to vibration.
- Tapered entrance hole to ensure proper sealing on most cable diameters.
|
 |
Locking Clip
Application:
- In order to prevent accidental disconnection a locking clip can be used
Construction:
- Stainless steel clip
- Can be placed without tools
|
 |
Bending Protection
Application:
- Bending protection for thermocouples and wire being used with standard connectors
Construction:
- Silicon rubber insert with tapered entrance hole ensures proper sealing.
- Fits all standard connectors.
|
 |
.
|
|
|
|
