Grommet

Application:

• Grommet can be fitted in the entrance hold of the connectoro to prevent moisture and dirt from entering the connector.

Construction

• Silicone ring, slit for easy mounting over wire. Will compress on the wire when the cover is fitted
• Temperature Rating 392 F (200 C)

Minature Connector Crimp Insert

Application:

• Designed for soldering or crimping on mineral insulated cable or crimping on insulated wire.

Construction:

• Brass machined, nickel plated insert with .1 mm tolerance on the cable.

Click image to enlarge.

Miniature Wire Insert

Application:

• A set wire inserts fitted in the entrance hold of the connector will provide a very good strain relief without any protruding parts from the connector.

Construction:

• Thermoplastic material with a round or oval hold to fit around a specific wire.

Miniature Connector Locking Clip

Application:

• Miniature connectors do not have a retention groove. In order to prevent accidental disconnection a locking plate can be used.

Construction:

• Glass filled thermoplastic with the same temperature rating as the connector body (392 F)
• Red color indicates clearly that the circuits are protected
• Can be placed and removed without any tools.

Click on image to enlarge

Mini Connector Wire Clamp Bracket

Application:

• Wire clamp bracket will provide optimum strain relief.

Construction:

• All stainless steel, incl. stainless steel screws

Click image to enlarge.

Mini Connector Protection Boot

Application:

• The two flexible siliccone rubber boots will cover the connector set snugly and prevent moisture, water, and dirt entering the connector.
• Temperature Rating: 392 F

Construction:

• Silicone cover with retention ring to prevent disconnection due to vibration.
• Tapered entrance hole to ensure proper sealing on most cable diameters.

Click on image to enlarge

Mini Connector Bending Protection

Application:

• Bending protection for thermocouples and wire being used with miniature connectors. Prevents mechanical damage of wires at entrance point of the connector.

Construction:

• Silicon rubber insert, tapered entrance hole ensures proper sealing on cable.
• Temperature: 392 F