W. H. Cooke & Co., Inc.

Manufacturer of thermocouples and RTD's. Supplier of industrial controls, heaters, and sensors since 1963.

Phone:717-630-2222

Email: sales@whcooke.com

Accessories for Standard Connectors

Contact us for more information.

Crimp Insert

Application: Designed for soldering or crimping on mineral insulated cable or crimping on insulated wire.

Crimp Insert Diagram
  • Construction:
  • Brass Machined insert with .1mm tolerance on the cable

Grommet

Application: Fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector.

Grommet Diagram
  • Construction:
  • Neoprene ring slit for easy mounting over the wire. Will compress on the wire when cover is fitted.
  • Temperature Rating: 248 F (120 C)
  • Part Number: TP-520-23

Wire Insert

Application: Wire inserts will provide a good strain relief without protruding parts from the connector.

Wire Insert Diagram
  • Construction:
  • Thermoplastic material with round or oval hole to fit around a specific wire. Other dimensions available.

Braze Crimp Adaptor

Application: Adapter can be fitted in the entrance hole of the connector to braze/crimp in mineral isolated cable.

Braze Crimp Adaptor Diagram
  • Construction:
  • Stainless steel adapter, AISI-303/DIN-1.4305
  • The adaptor fits in all standard connectors.

Connector Wire Clamp Bracket

Application: Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diamter.

Connector Wire Clamp Bracket Diagram
  • Construction:
  • All stainless steel, incl. stainless steel screws.
  • TP-530-18-A (1/8") Insert Crimp
  • TP-530-36 (3/16") Insert/Hose
  • TP-530-14 (1/4") Insert
  • TP-530-16 (1/16") Insert

Tube Adaptor Standard Connector

Application: Can be used to mount thte connector on mineral insulated cable or a tube type thermocouple. Can be used several times if not overtightened.

Tube Adaptor Standard Connector Diagram
  • Construction:
  • Stainless steel compression fitting with a brass ferrule on stainless steel bracket.
  • TP-560-16 (1/16")
  • TP-560-18 (1/8")
  • TP-560-36 (3/16")
  • TP-560-14 (1/4")
  • TP-560-38 (3/8")
  • Call for additional sizes.

U Bracket Crimp/Braze

Application: Allows the use of two standard wconnectors to be fitted on duplex mineral cable or duplex wire.

U Bracket Crimp/Braze Diagram
  • Construction:
  • Stainless steel crimp braze/crimp-tube (AISI-303/DIN 1.4305

Wire Clamp

Application: Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter.

Wire Clamp Diagram
  • Construction:
  • All stainless steel incl. Stainless steel screws.

U Bracket

Application: Allows the use of two connectors to be fitted on duplex mineral cable or duplex wire

U Bracket Diagram
  • Construction:
  • Chrome plated cabron steel bracket with plated steel screws.
  • Is designed to be crimped on the transition piece with an outside diameter of 6 or 8 mm.

U Bracket

Application: Allows the use of two connectors to be fitted on a duplex wire. Construction provides optimum strainrelief and large difference in minimum and maximum diameter.

U Bracket Diagram
  • Construction:
  • All stainless steel with stainless steel screws.

U Bracket Tube Adaptor

Application: Allows the use of two connectors to be fitted on a duplex mineral insulated cable or a tube type thermocouple. Can be used several times if not overtightened.

U Bracket Tube Adaptor Diagram
  • Construction:
  • Stainless steel compression fitting brazed on stainless steel L bracket
  • Stainless steel nut and brass ferrule

Protection Boot

Application: The two flexible silicone rubber boots will cover the connector set snugly and prevent moisture, water, and dirt from entering the connector.

Protection Boot Diagram
  • Construction:
  • Silicone cover with retention ring prevent disconnection due to vibration.
  • Tapered entrance hole to ensure proper sealing on most cable diameters.
  • Temperature rating: 392 F (200 C)

Locking Clip

Application: In order to prevent accidental disconnection a locking clip can be used

Locking Clip Diagram
  • Construction:
  • Stainless steel clip
  • Can be placed without tools

Bending Protection

Application: Bending protection for thermocouples and wire being used with standard connectors

Bending Protection Diagram
  • Construction:
  • Silicon rubber insert with tapered entrance hole ensures proper sealing.
  • Fits all standard connectors.
ANSI Color Code Chart